How to set GT911 touch data scan interval or interrupt?
GT911 is used as a touch panel.The problem is that the 0x814E scan cycle is too fast.And when I touch the panel, the key value is read continuously, so it is a problem. I want to know how to gene ...
27c6:55a4 Goodix FingerPrint Device Datasheet
Dear Sir/MadamI have a "lenovo thinkbook 14-iil 20 sl" with the "ID 27c6: 55a4 Shenzhen Goodix Technology Co., Ltd. Goodix FingerPrint Device" and I need a Linux driver or the Datasheet to be able to ...
Limux driver for Fingerprint Reader
Hello.Do you plan to support "27c6:5117 Shenzhen Goodix Technology Co., Ltd. Fingerprint Reader" for linux?
Is it possible to obtain drivers for a Goodix Touchscreen controller that is used in a mini 2 in 1 laptop. Contact with the manufacturer has not worked. The touchscreen in not working at t ...
Are there any Linux drivers for the FIngerprint reader used in the Dell Inspiron 5770?
Hello,I am using Ubuntu 20.10 on my Dell Inspiron 5770, which has an Goodix Fingerprint reader built in.I cannot find any linux drivers for this Fingerprint reader.with the commands lsusb I get this i ...
goodix tablet cmx WinTek 101 1016
lg. I have a tablet cmx wintek 101 1016 and I fail to set the goodix tauch, when I press the left there is a circle in the right and vice versa. I need a driver
GT911 - QUESTION
I am using GT911 for my product. And I will use a glass to protect the screen. But I have questions that: - How could I configure/ change the sensitivity of ...
Fingerprint sensor driver for DELL XPS 7590 on Ubuntu
Goodmorning,Do we have any updates on when you will release the goodix driver for the XPS 7590 for Linux systems?Thanks in advance.
Goodix Fingerprint Device Windows 10 Pro - Drive Help
Dear, I urgently need the "USB device drive \ VID_27C6 and PID_5740" for the Goodix fingerprint device Windows 10 Pro. I ask you to help me, being a great honest company that values an e ...
Touchscreen GT911 is not recognized by x86_64 Ubuntu 20.04
Hi, I use touchscreen controlled by Goodix GT911. I have connected touch screen to my x86 Apollo Lake Intel board(sca, scl, ground and vcc. Interrupt -> pull_up, reset to system reset). I have ...